VERSION CONTROL
Document Name: SCHEDULE 12 - LEASED LINE & ETHERNET CONNECTIVITY SERVICES Version: v1.1 Date Issued: 2nd October 2025 Author/Editor: M.Lulham Versioning: https://infopoint.mtechsystems.co.uk/versioning
1.1 Except as defined in this Schedule 12 (Leased Line & Ethernet Connectivity Services), capitalised terms shall have the meanings given to them in the Agreement.
1.2 To the extent applicable to the Leased Line & Ethernet Connectivity Services, in the event of conflict between the terms of this Schedule 12 and the Agreement, the provisions in this Schedule 12 shall take precedence, and in the event of conflict with a Service Document, Statement of Work or Service Order, the provisions of that Service Document shall take precedence over this Schedule 12.
These terms are between {Organization Name} the Customer and M-Tech Systems Limited, a company with registration number 04843249 and VAT number GB197312686, which has its registered office and principal place of business is at Martello House, Edward Road, Eastbourne. BN23 8AS (“M-Tech Systems”, “M-Tech”, “us” or “we”).
These terms (“Terms”) describe how M-Tech Systems will provide Leased Line & Ethernet Connectivity Services to you; {Organization Name} (“Customer” or “you”), how the parties may change or end our Agreement, what to do if there is a problem and other important information. Please read them carefully.
These Terms constitute a Service Document. Where the Customer and M-Tech Systems Ltd have entered into a Master Services Agreement (“MSA”), this Service Document (whether described as a Statement of Work or a Service Order) is made pursuant to, and governed by, that MSA. Where no such MSA is in place, these Terms shall form the entire agreement between M-Tech Systems Ltd and the Customer for the provision of Leased Line & Ethernet Connectivity Services. In the event of any conflict, the order of precedence set out in the MSA (where applicable) shall apply.
If you have any questions about these Terms or the Services, please contact us at [email protected]
The following definitions used in these Terms shall have the meanings given to them below:
“Agreement” has the meaning set out in clause 2.1.
“A-end” means the remote termination location of an Ethernet Circuit. For Ethernet Circuits, this is usually a data centre/carrier hotel in London, or local POP. For Point-to-Point Ethernet Circuits (non-Internet), this is one of the Customer’s Premises.
“B-end” means the Customer’s Premises location.
“Bearer” means the maximum CDR at which the Service can provide bandwidth over an Ethernet Circuit. In certain circumstances the bearer size can be upgraded. The Bearer is measured in Mbps.
“Cabinet” means a local communications Cabinet whereby traditional copper delivered services and FTTP route from. It is usually placed between the Customer’s Premises and the local Exchange. The Cabinet is where FTTP and FTTC services route via and each Premises that is not connected via an Exchange-Only line will route via.
“Carrier” means the supplier responsible for providing the Service connectivity between the A-end and B-end.
“CDR” means a committed data rate being the dedicated level of symmetrical bandwidth over an Ethernet Circuit provided on delivery of the Service which is measured in Mbps.
“Charges” means any charges which the Customer is liable to pay under this Agreement, for example installation costs, line rentals, circuit rentals, management fees, etc.
“Circuit” has the meaning set out in the definition of Services below.